Category Archives: Tutorials
How to configure Dell N2024 or N2048 Switch
nIn these few steps I will be showing you how to configure a Dell N2024 or n2048 switch. We will be using putty and a series of commands to get these Dell switches.
- Download and install PUTTY onto the computer you will be using to configure the Dell N2024 or n2048 switch.
- Make your life easier with a USB Console Cable. But yes you will need one of these to configure the switch.
- Unpack your Dell N2024 or n2048 switch.
- Make sure you have the Console cable connected to the switch and the computer.
- Open up Putty. Make sure to select the Serial radio button. Keep the Speed at 9600 you may have to change the serial line from COM1 to COM2 or COM3 to get connected to the switch
- Once connected wait for the switch to load. Step 1 will display: “Would you like to run the setup
Keep Old Server Name During File Server Migration
In this complete guide I will show you how to migrate a old Windows File Server 2008, 2012, 2016, 2019 and windows server 2022 to a new Server Host Name while keeping the OLD Server Host Name.
Step 1 : Stand up your new file server, mine is called FS2.
Step 2 : Make sure to keep the same folder structure if possible as you see in your old server, in my case it is called FS1.
Step 3 : I like to use software called SyncFolders , it can be used to transfer all your files with NTFS permissions from Source (FS1) to Detestation (FS2)
Step 4 : In my case I configured the SyncFolders Software to Point my FS1 D:\ drive TO \\FS2\D$ or you can just share the D drive from FS2. You can also schedule this software to run hourly or nightly it will sync the … Read the rest
How to configure VMware vMotion on vSphere 6.7
Learn the essentials of configuring VMware vMotion on vSphere 6.7. Discover seamless live migration of virtual machines with this comprehensive guide.
In these steps below I will be guiding you through setting up VMware vMotion using vSphere 6.7.
- Log into your vSphere 6.7 portal
- In my case I want to have my esxi2 server to have the ability use vMotion.
- Proceed with Clicking the Configure Tab
- On the left hand side scroll down and location “Networking” , Click on VMKernel adapters.
- Proceed with clicking on the Add Networking button.
- You are now prompted with the Add Networking Wizard. In step 1 of this wizard. You will Keep VMkernel Network Adapter Selected, then click Next.
- Step 2 in the wizard we will be selecting New Standard Switch and then proceed with clicking Next.
- In Step 3 of the wizard, best practice is to use a dedicated Unused adapter.
How to Fix CD/DVD RW Access Denied – Grant Permission
Learn how to fix access denied error for CD/DVD RW drive in Windows. This guide enables burning of blank DVDs and CDs. Follow the steps to resolve the issue.
Introduction
Are you experiencing frustration and annoyance when trying to access your CD/DVD RW drive, only to be greeted with an infuriating “Access Denied” error message? Fear not! In this comprehensive guide, we will delve into the intricacies of fixing the CD/DVD RW access denied issue and granting the necessary permissions to regain control over your optical drive. So, roll up your sleeves, and let’s get started on this troubleshooting journey!
Understanding the CD/DVD RW Access Denied Issue
Before we dive into the solutions, it’s crucial to understand why this problem occurs in the first place. When you encounter an “Access Denied” error message while trying to access your CD/DVD RW drive, it usually means that the operating system or security … Read the rest
Rejoin Domain Using CMD To Fix Failed Trust Relationship
At some point you may run into an issue “The trust relationship between this workstation and the primary domain failed” and here are a few steps to rejoin domain using CMD.
- Have the ability to log in with a local Administrator account, For EX: by typing, “.\Administrator” in the login window. If you’re creative and resourceful you can hack your way in without the password.
- Now you need to make sure that netdom.exe is working. Netdom.exe depends on what version of Windows you’re running. With Windows Server 2008 and Windows Server 2008 R2 netdom.exe needs to be enabled in the Active Directory Domain Services role. On Windows Vista and Windows 7 you will have to get it from Remote Server Administration Tools (RSAT). Google can help you get them. For other platforms see this link: http://technet.microsoft.com/en-us/library/ee649281(WS.10).aspx
- Oce step 1 and 2 are done we can run netdom.exe to change the
How To Fix Microsoft Outlook Signature Window Not Opening
Do you have Microsoft Outlook 365 , 2016 or 2019? Did a recent Windows Update break the ability to open the signature window? Here are the steps to take to resolve that issue.
- Follow the path to Widows Settings>Default Apps>Apps and Features>
- Uninstall the Microsoft Office \ Outlook version you installed.
- Uninstall Microsoft Office Desktop Apps which is the default apps windows installs.
- Open up Registry Editor as Administrator.
- Now lets make a backup of registry, Click File > Export and save this backup to the desktop.
- On your keyboard press CTRL + F to open the find window
- Search for the following and delete all keys containing: 0006F03A-0000-0000-C000-000000000046
- Reboot Computer
- Grab your Microsoft Office \ Outlook Software and reinstall.
- Configure your Outlook account.
- Go in your mail options and you should now be able to open the signatures window.
Conclusion
A malfunctioning signature window in Microsoft Outlook can be … Read the rest
Unifi UAP-AP AC DHCP Not Working Using Firmware 4.3.24
If you are having problems your Unifi UAP-AP AC DHCP Not Working Using Firmware 4.3.24 follow these steps to rollback back the firmware.
How to rollback 4.3.24 firmware.
- Log into your Unifi Controller.
- Make sure that Auto Update is disabled
- Settings > Site > Services , uncheck Automatically Upgrade Device Firmware.
- Also check scheduled upgrades. Settings > Services > Scheduled Upgrades and remove them.
- On the left hand side menu Click on Unifi Device Icon
- Click on the the wireless access point you would like to start with so the side menu expands to display a gui like below.
- Click on the gear\config icon
- Scroll down to the bottom and expand MANAGE DEVICE
- In the Custom upgrade section use the copy/paste the following known working firmware provided: https://dl.ui.com/unifi/firmware/U7PG2/4.3.20.11298/BZ.qca956x.v4.3.20.11298.200704.1347.bin
- Click Custom Upgrade
- Wait a few and you should be good to go!
How To Restart Veeam Backup Services With Powershell
Veeam Backup is great but once you run into a problem Veeam backup can be quite tricky.
There are some cases that you may happen to get jobs stuck or the console just won’t open up for you, you always can rely on restarting eventually the services and avoid an unnecessary server restart.
You can either make a script or use line by line the following commands.
Why Restart Veeam Backup Services With Powershell?
Before we delve into the details of restarting Veeam Backup services with PowerShell, let’s understand why you might need to perform this action. Restarting the Veeam Backup services can help resolve certain issues such as:
-
Performance degradation: If you notice a significant decrease in the performance of your Veeam Backup, restarting the services can help alleviate the issue.
-
Error messages: Sometimes, error messages may occur within the Veeam Backup services. Restarting them can help clear any
Dell Switch n2024 and n2048 Default Login
If you are looking for a default Login Account and Password you have come to the right place because there is no Default login for the Dell Switch n2024 or the n2048.
How to Access Dell Switch n2024 and n2048 Without a Password
- Grab your console cable and your computer.
- Make sure to install Putty which would be used to connect to the Dell n2024 or n2048 Switch.
- Manually reboot the switch and also have putty open and connected.
- When the Dell switch n2024 or n2048 loads you will get a message to select an option.
-
- 1- Start Operational Code
- 2- Display Boot Menu
-
- When you see the Dell Networking Boot Options, type “2” and press “Enter” to select within 3 seconds. If you miss this step the switch will need to be powered on again.
- Once the boot menu is loaded you will see options 1 through 12. Type
How To Migrate SYSVOL From FRS to DFSR
You are most likely here because you have encountered an issue during your Active Directory Domain Controller migration. Most likely your active directory is old, FRS was released back in Windows Server 2000 and was only supported up to Windows Server 2012. With Windows Server 2016 and Windows Server 2019 you must run DFSR instead of FRS. In this tutorial you will learn how to migrate SYSVOL from FRS to DFSR.
During your migration to the new environment, you may run in the following error if still using FRS and upgrading to new Domain Controller.
Windows Server version can no longer be added as an Active Directory domain controller (DC) to an existing domain that is still using File Replication Service (FRS) for replication of the SYSVOL share.
When you try to add a New Windows Server 2016- 2019 as a DC to the domain, you receive the following error … Read the rest
Loading ...