Category Archives: Tutorials
How to configure Dell N2024 or N2048 to use a specific vLAN tag
In this tutorial you will learn how to configure your Dell N2024 or N2048 to use a specific vLAN tag. We will configure a switch port as port access afterwards assign a specific vLAN ID to the switch port.
Let’s get started.
Step 1: Use your Console Cable or SSH into your Dell N2024 or N2048 switch using Putty.
Step 2: After you have access type in enable and your password. Once logged in type in config.
console>enable console#config
Step 3: Now decide which ports you want bind a specific vLAN to on your Dell N2024 switch. In this use case I will focus on switch port 2.
Step 4: Now we will select the interface / port we want to apply our settings.
console(config)#interface gigabitethernet 1/0/2
Step 5: Now that you have the port selected, we will change the port mode to access.
console(config-if-Gi1/0/2)#switchport mode access
Step 6: … Read the rest
How to configure Uplink with all vLAN on Dell N2024 or N2048
In this tutorial you will learn how to configure your Dell N2024 or N2048 Uplink port to use all vLAN’s. We will configure the port as a Trunk afterwards allow all vLAN passthrough and then set a native vLAN for device management.
Let’s get started.
Step 1: Use your Console Cable or SSH into your Dell N2024 or N2048 switch using Putty.
Step 2: After you have access type in enable and your password. Once logged in type in config.
console>enable console#config
Step 3: Now decide which port you want to be your Uplink port. In my case I will be using port 24 on my Dell N2024 switch.
Step 4: Now we will select the interface / port we want to apply our settings.
console(config)#interface gigabitethernet 1/0/24
Step 5: Now that you have the port selected, we will change the port mode to a trunk.
console(config-if-Gi1/0/24)#switchport mode trunk
How Configure UniFi Controller 7.0 DHCP With Microsoft Active Directory DNS
In this tutorial you will learn how to configure Unifi Controller 7.0 DHCP Server with Microsoft Active Directory DNS.
Let’s get started.
Make sure you are on latest Unifi Controller Version. This tutorial was created for version 7.0.25. I will be using a Unifi UDM Pro for this configuration.
Step 1: Log into your Unifi Controller.
Step 2: Click Settings 
Step 3: Click Networks 
Step 4: Click on the existing network you want to apply your DHCP with Microsoft Active Directory DNS.
Step 5: Scroll down to DHCP and click Show options.
Step 6: Your IP address subnet may be different however in this example you would place your Active Directory DNS server IP addresses in these DNS fields.
Step 7: Click the Apply Changes button.
You are good to go your network devices should now auto obtain proper DNS from the Unifi Controller 7.0 DHCP Server.
I
… Read the rest
How To Create An Azure Virtual Machine – Lab1
In this tutorial you will learn how to create an Azure Virtual machine using Window Server 2022 Datacenter image and learn how to connect to the virtual machine using RDP.
Task Details
-
Sign to Azure Portal.
-
Create an Azure Virtual Machine.
-
Understand deployment details.
-
RDP into the virtual machine
-
Test the created virtual machine.
Task 1: Login to Azure Portal
- Open a browser tab and go to the Azure portal using URL https://portal.azure.com.
- Sign in with your username and password on azure portal.
Task 2: Create A Virtual Machine
1. There are a few options you can locate the Virtual machines afterwards click on the Virtual machine’s menu in the Left panel. You can also use the search bar at the top to find the Virtual Machines page or you can use the Virtual machines icon right Infront of you.
2. If you see any error in the page, wait … Read the rest
How To Configure VLAN On UniFi Controller 7.0
In this tutorial you will learn how to configure a VLAN with DHCP on UniFI Controller 7.0.
VLAN Stands for “Virtual Local Area Network,” or “Virtual LAN.” A VLAN is a custom network created from one or more existing LANs. It enables groups of devices from multiple networks (both wired and wireless) to be combined into a single logical network. The result is a virtual LAN that can be administered like a physical local area network.
Let’s get started.
Make sure you are on latest Unifi Controller Version. This tutorial was created for version 7.0.25. I will be using a Unifi UDM Pro for this configuration.
Step 1: Log into your Unifi Controller.
Step 2: Click Settings
Step 3: Click Networks
Step 4: Once the page loads click on Create New Network.
Step 5: Name your Network for the use case it is intended for. For me, I have to create this VLAN for my … Read the rest
How To Configure Unifi Controller Guest Hotspot With Stripe Payment
In this tutorial you will learn how to configure your Unifi Controller 7.0.22 Guest Hotspot with Stripe Payment. This will come handy if you’re looking to monetize your Public WiFi access.
Before we start make sure you are on Unifi Controller 7.0.22 or later and proceed to adopt all your Unifi devices into your controller. Make sure all firmware is updated as well.
The Tutorial Run Down
- Configure a Guest Network.
- Configure Bandwidth Profile.
- Configure a SSID for a group of access points.
- Configure Guest Hotspot Profile with Stripe Payment.
- Simple way to view Stripe payments.
Let’s start by configuring the Guest Network.
1. Log into your Unifi Controller 7.0.22
2. Once you’re on the dashboard click Settings. 
3. Now locate and click on Networks.
4. Now that you’re on the Networks Section locate and click on Create New Network.
5. For our New Network let’s do … Read the rest
How To Configure Unifi Controller Guest Hotspot With Vouchers
In this tutorial you will learn how to configure your Unifi Controller 7.0.22 Guest Hotspot with Vouchers. This will come handy if you’re a hotel or some type of business looking to control guest access to your Wi-Fi using a finite time-based voucher.
Before we start make sure you are on Unifi Controller 7.0.22 or later and proceed to adopt all your Unifi devices into your controller. Make sure all firmware is updated as well.
The Tutorial Run Down
- Configure a Guest Network.
- Configure Bandwidth Profile.
- Configure a SSID for a group of access points.
- Configure Guest Hotspot Profile with vouchers.
- Simple way to manage vouchers.
Let’s start by configuring the Guest Network.
1. Log into your Unifi Controller 7.0.22
2. Once you’re on the dashboard click Settings.
3. Now locate and click on Networks.
4. Now that you’re on the Networks Section locate and click on Create … Read the rest
How To Configure Site to Site VPN On Unifi Controller 7.0.22
In this tutorial you will learn how to configure Unifi UDM PRO Site to Site VPN on Unifi Controller 7.0.22.
A site-to-site virtual private network (VPN) is a connection between two or more networks, such as a corporate network and a branch office network. Many organizations use site-to-site VPNs to leverage an internet connection for private traffic as an alternative to using private MPLS circuits.
Site-to-site VPNs are frequently used by companies with multiple offices in different geographic locations that need to access and use the corporate network on an ongoing basis. With a site-to-site VPN, a company can securely connect its corporate network with its remote offices to communicate and share resources with them as a single network.
Let’s get started.
Make sure you are on Unifi Controller Version 7.0.22. I will be using a Unifi UDM Pro for this configuration.
Step 1: Log into your Main Office Unifi … Read the rest
How To Install LetsEncrypt SSL Certificates On Omada Controller
In this tutorial you will learn how to install LetsEncrypt SSL certificates for your Omada Controller hosted on Ubuntu 20.04.
Introduction
Omada Controller, TP-Link’s management interface for EAP devices, naturally becomes a crucial platform that benefits significantly from enhanced security measures.
In this tutorial, we will guide you through a detailed, step-by-step process of integrating Let’s Encrypt SSL certificates into your Omada Controller setup. Whether you’re a seasoned network administrator or a newbie just dipping your toes into network security, this guide is tailored to provide clarity and simplicity.
Let’s embark on this journey together, ensuring a safer and more secure Omada Controller experience for you!
Step 1: Generate Certificate
- First, install and refresh the core for snap:
snap install core; sudo snap refresh core
- Next, install certbot:
snap install --classic certbot
- Create a symbolic link for certbot:
ln -s /snap/bin/certbot /usr/bin/certbot
- Generate the certificate:
certbot certonly --standalone --preferred-challenges http
How To Configure Unifi Controller 7.0.22 UDM-PRO Security Settings
In this tutorial you will learn how to configure your Unifi Controller 7.0.22 Network Security Settings so you can properly secure your networks. In this tutorial I will be utilizing a Unifi UDM-Pro on controller version 7.0.22.
Key Knowledge
- GeoIP Filtering is a technology that can block web traffic from entire countries, can be an effective way to stop hackers from attacking your business. As the name suggests, it blocks network connections based on geographic location – information it gets based on IP addresses. This can then be used to filter and prevent both outgoing and incoming connections to and from your network.
- An Intrusion Prevention System (IPS) is a type of engine that identifies malicious traffic by checking the signatures. The signatures contain known traffic patterns or instruction sequences used by malware. This type of signature-based engine can only detect anomalies based on known malicious traffic patterns.
- An Intrusion
Loading ...